One: Choose the Printing correct and appropriate printing slurry according to different materials or different requirements. For example: In the general cotton or blended cloth printing, Printing it is best to choose the general elastic mortar or transparent slurry, the nylon or denim cloth printing, the use of nylon glue or transparent paste, if special treatment, you need to use waterproof nylon mortar or clear paste.
Second: Before the use of plastic paste printing, such as because of the glue paste time too long, it should be diluted with water (the use of water should not exceed 5%). Then with 180 mesh screen filter, and then printing, so you can get more soft and smooth effect.
Three: When printing, it is best to choose the screen version of 80-120, the net distance to keep in 3mm 5mm for the suspended printing.
Four: If the printing pattern is found to be perfect, Printing the water-based softener of 3 can be added in the slurry for printing or selecting other more suitable water-based slurry. It's best to use 150 degrees of heat for 2-3 minutes after a natural dry 24 hours, so you can get a better degree of firmness.
Five: The use of plastic paste printing, to pay attention to the white glue paste and the proportion of transparent paste. Generally do light-colored cloth printing, Printing white glue paste and transparent paste ratio of 2:8 or 1:9, if it is a dark cloth printing, the proportion should be adjusted to 4:6 or 3:7, but you must pay attention to viscosity.
Six: If the print should be washable or other Printing special treatment, you can add a proper amount of fixing agent for printing, after its natural dry 24 hours after 150 degrees bake 2-3 minutes, then test its firmness.
VII: When using glue printing, if the printing pattern is not bright enough, in addition to adjusting the proportion of white glue and transparent paste, you can also cover the printed pattern with a layer of transparent paste or a light paste.
VIII: Special printing materials are rich in various aspects of textile printing processing, for example:. Crack slurry, cracking slurry, cracking slurry, self-cracking slurry, drawing paste: Knitted fabric, denim (pull white color) smell pulp, fluff pulp, all kinds of foaming slurry (such as velvet foam, etc.), denim coating and so on.